Página inicial ‣ Españolo ‣ Calas Macizas
Calas Macizas
| Presentación |
Las calas macizas están recomendadas:
- Cuando las tolerancias, no son muy estrechas
- Para suplementar Espesores inferiores a 0,5 mm
| Materiales & Espessores |
| MATERIALES | ESPESORES | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNE | N° EN | ISO | AISI/SAE UNS |
0,012 | 0,019 | 0,025 | 0,05 | 0,075 | 0,1 | 0,15 | 0,2 | 0,25 | 0,3 | 0,4 |
| Acero | ||||||||||||||
| 1.1121 | 1010 | 1010 | x | x | x | x | x | x | x | x | x | |||
| Acero Inoxidable | ||||||||||||||
| F.3517 | 1.4310 | 301 | x | |||||||||||
| 1.4300 | 302 | x | x | |||||||||||
| F.3551 | 1.4301 | X5CrNi1810 | 304 | x | x | x | x | x | x | x | x | x | x | |
| Aluminio | ||||||||||||||
| L 3001 | 1200 | Al99,0 | 1200 | x | x | x | x | |||||||
| Composite | ||||||||||||||
| PET (ISO) | x | x | x | x | x | x | x | x | ||||||
| Copper | ||||||||||||||
| C101 | C11000 | CW004A | Cu-ETP | A la demanda | ||||||||||
| Latón | ||||||||||||||
| CW506L | CuZn33 | C26800 | x | x | x | x | x | x | x | x | ||||
| CW507L | CuZn36 | C27200 | x | x | x | x | x | x | x | x | ||||
| Titanio | ||||||||||||||
| Grado 1 | 3.7025 | 5832-2 | R50250 | x | x | x | x | |||||||
| Grado 2 | 3.7035 | 5832-2 | R50400 | x | x | x | ||||||||
| MATERIALES | ESPESORES | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNE | N° EN | ISO | AISI/SAE UNS |
0,5 | 0,8 | 1 | 1,2 | 1,5 | 1,8 | 2 | 2,5 | 3 | 4 < |
| Acero TC | |||||||||||||
| AE 235 B-FN | 1.0037 | E 235 B | A203.C | x | x | x | x | x | x | x | x | x | x |
| Acero Inoxidable | |||||||||||||
| F.3551 | 1.4301 | X5CrNi1810 | 304 | x | x | x | x | x | x | x | x | x | x |
| 1.4307 | X2CrNi18-9 | 304L | x | ||||||||||
| Aluminio | |||||||||||||
| L-3051 | 1050A | Al99,5 | 1050A | x | x | x | x | x | x | x | x | x | x |
| Latón | |||||||||||||
| CW507L | CuZn36 | C27200 | x | x | x | x | x | x | x | x | x | x | |
Dimensiones según sus planos o indicaciones.